Weekend Workshop Shelf Frame, Square, Black

Compatible shelf dimensions and width of installation of the main unit: Can be used with commercially available 1x6 wood or pine wood with a cross-section width of 5.9 inches (150 mm) and a thickness of 0.5 - 1.0 inches (12 - 25 ・The width of the frame itself is 23.6 inches (60 cm). Choose the number of pieces you need to match the length of your shelf. Installation Precautions: ● Small and sharp parts, especially with children. Please be careful of loss. ● This product can be mounted on the wall of plywood or wood wall with tapping screws or pinning to the wall of the plaster board. Will not work on any other wall When installing with tapping screws, the screw holes will remain after removal. Use in an uninterrupted area. It is easier to install if you work with two people. Precautions for Use: This product is for indoor use. Do not use for anything other than the intended purpose. Do not apply side force to the frame body or shelf. Do not use the load rapidly. This may cause them to fall or break. Please do not shake or hang it too hardly. (Please pay special attention to small children. ) Please check regularly for distortion, pin or screw loosening during use. If any abnormalities occur, please discontinue use immediately. We cannot accept compensation for unavoidable forces such as celestial disasters, or incidents due to modification or aging, or incorrect use. The strength of the load is determined by the thickness and strength of the shelves that are matched to the product. The load capacity is an experimental value. We do not guarantee it. Weight capacity includes shelf weight. If the shelf board sagging occurs, replace the shelf board with a thick one, or narrow the mounting distance between the frame itself. Products brought outside of Japan are not subject to compensation.

• Product Size (W x D x H): 0.6 x 6.3 x 6.3 inches (1.5 x 16 x 16 cm); Load Capacity: 5.5 lbs (2.5 kg); Color: Black
• (Set Contents) Frame x 1, tapping screws x 4, instruction manual (English language not guaranteed) for mounting gypsum board boards: 2 pin caps, 8 pins (including 2 spare pieces), 2 pin cap covers, "For mounting veneer boards and wooden walls": 2 tapping screws
• Material: Body: Iron, epoxy resin powder coating; Resin parts: ABS resin, EVA resin, Pins: Stainless steel, Screws: Iron, Plated
• You can DIY the shelf on the wall by combining 1 x 6 materials on the market or pine wood with a width of 5.9 inches (150 mm) and thickness of 0.5 - 1.0 inches (12 - 25 mm). It will not damage the walls too much, and can be secured with the included pin
• The simple square design allows you to create a minimalistic shelf that will accent your room. Create a fashionable look by combining the color of the shelves and the items you put in. Available in 2 colors, matte black and matte white that is easy to match any room